Customer Reviews
Handy 
2008-06-15
I wish I had had this little machine years ago to let in hinges and such; really is handy and easy to use.
does a great job on laminate trimming 
2008-03-07
I've not owned another laminate trim router, but I have to say that this does a great job on laminate. I've just completed a set of countertops and backsplashs and it does a fine job. I've not seen the problems with height control that some mentioned but then again, I wasn't doing anything especially tricky. It runs very smoothly, is easily handled in one hand and is relatively quiet.
I would heartily recommend this for countertop makeup.
Porter Cable trim router does the gig 2007-09-28
In the company I work with, we've using an older version of this trim router and it has like 8 years old or something, and it is a very useful tool in our work, quick, clean and light machine. I'm normally using DeWalt with other tipe of tools, but there's no reason to take aside this trim router at all. Good quick working tool!!
Great little worker. 2006-02-21
The versatility of this tool is great. I have used this tool for the past 3 years from zipping out holes (accompanied by an adapter) in drywall to trimming laminate, to mortising out hinge butts. Nothing but good recommendations for this tool.
Good for its inteded use 2005-10-25
After reading a few reviews here I thought I would comment on this tool myself. I am a proffesional comercial woodworker and have owned and bought for my company this router maybe 15 times over the years so I am very familiar with it. One thig that I keep seeing in the negitive column in everyones reviews is that it is not precise enough for some people, all I can say is keep in mind what this tool is inted for....this is a laminate trim router...there is nothing precise about that, infact it has always been kind of a joke in the industry that they put the fine adjustment knob on the router at all! If you are looking for a small precise genral pourpose woodworking router this is not what you want, if you are looking for a laminate trim router as the name implies this is a very good one, we do millons of dollars worth of work each year here and have found for the price this is a fine trim router.
Should have looked around a little more first.... 
2005-08-15
Laminate Trim Machine 5.6A, 30,000 RPM, 1/4 Collet, Spindle Lock, Precision Machined, Aluminum Base, Micro-Set Depth Of Cut Adjustment Knob, 100% Sealed Ball Bearings.
No substitute for the Porter Cable 310 production router 2004-06-16
While this trimmer might be fine for quick roundovers and the like, it lacks the refinement and precision necessary for fine woodworking and production work. Careful observers will notice that the base and motor are not perfectly perpendicular to one another. There is too much slop in the height adjustment mechanism and set knob. Too, the base itself is not perfectly flat (place a sheet of 400 grit sandpaper on a flat table and run the base plate over it a few times. High and low spots will quickly become apparent.) All in all, the 7310 is very underwhelming in its quality and precision. As far as the "Rotozip" style trimmers go, the DeWalt and Bosch models offer better quality and refinement then this PC, though they, too, suffer from some of the same problems.
By far the better alternative is the tried-and-true Porter Cable 310 production router. This model has long been a favorite of professional cabinetmakers (the guys in my shop own two or three each), but it is somewhat unknown to the woodworking public at large. It is not made for mass market consumers (Home Depot/Lowes don't carry it), and PC has instead promoted the 7310 trimmer as its mainstay trim router. The 7310 trimmer, however, is but a shadow of the 310. Read some of the reviews on the 310 and you'll see what I mean. The 310 is truly a fine machine. At $100, the 7310 is not a great value. At $159, the 310 is worth every penny. Spend more now and you'll be very satisfied with the knowledge that you own the very best. More importantly, your work will show the wisdom of your choice.
Sadly, Porter Cable no longer sells the excellent offset, angle, and other optional bases for the 310. If you need these you can acquire them used or new-old-stock, but they are getting harder to find. The premium prices of these trimmers and optional bases found on Ebay attest to the loyal following the 310 has. These bases are available for the 7310, but you will still have to deal with the inferior design and quality of that trimmer. Again, go with the DeWalt or Bosch if you need a complete trim kit with all the bases. If you don't need them, get the 310 and you'll be set for life. You'll be glad you did.
Lame Base 
2004-04-23
I've found the height adjustment clumsy and the knurled knob to be hard to sufficiently tighten by hand (it creeps with use). The best trim router out there is their 310P production trim router.
This is the one to get 2003-06-24
When reading Woodworking with a router, I noticed the author stated, that after getting a standard size router, your second router should be a laminate trim router. It is so versatile. Since it is smaller than most routers, it is more manageable. Shop made jigs using a router, are best done with one of these. Since it takes the standard 1/4" bits, it makes it a convenient, multi use tool.
If you do a lot of counter top, laminate work, their combo pack, with the different bases, is the top choice. Saves a lot of money over buying the individual bases.
I looked at some overseas, and the Ryobi model, and decided to spring for the Porter Cable. The metal base, and fine adjust feature, and metal housing, set it apart. This is a professional level piece of equipment. Should give you many years of trouble free performance.
When you are doing fine work, the lightness, and ease of visibility afforded by this router, is unmatched.
If I had to be critical of it, I would say that when changing a bit, I remove the base, which isn't that hard, for easy access. The base is designed to come on and off real easy, since it is one part of a multi base system.
All in all, definitely 5 stars. The more you use it, the more it will become your favorite one.
Great little Machine 2002-03-05
This trimmer is a real pleasure to use; great balance, comfortable for extended periods of use. Its drawback seems to be the difficulty in changing bits, the 1/4" bit shanks are extremly tight in the 1/4" collet. Overall it is one of the more well balanced laminate trimmers that I have.
