Universal Level Ett Ladder Stabilizer #DM101

Customer Reviews

great product

2008-02-29
This product is great. Easy to install and very stable. My property is on a slope and this is a "life saver".

GOOD SOLID PRODUCT

2008-01-19
I bought this product primarily to paint the side walls of a high stairwell without using bricks, concrete blocks or a makeshift wooden platform. It turned out that I had to use a single concrete block in addition to the leveler but I'm still happy with it. The leveler would work for this task if your stair tread is over half as wide as your ladder plus a couple of inches. If the treads are not that wide then you end up with one leg of the ladder on one step and the other leg out too far for the leveler to rest on the next step down. The 9-1/2" reach of the leveler is too short to reach the next step down. However, a single concrete block on that next step gave a good, solid platform for the leveler and it made the painting a snap.

The levelers were very simple to install on an alumnium ladder--took the old feet off, drilled four holes in each leg, and bolted the levelers on with the supplied hardware. Less that an hour job!

This is a very good product and I have no doubt that it will last a long time and provide good service. The legs are sturdy and the feet are wide enough to give a good solid base. I wouldn't hesitate to recommend it to anyone as long as they realize that it's not quite perfect for use on stairs. I'm sure it'll be great when I'm using it on sloping ground this summer.

I am very pleased

2008-01-11
I was a little concerned that the ladder stabilizer did not look larger (I associate size with strength). But after reading other reviews I decide to buy them. I was very pleased at how strong they are. It took me about 50 minutes to do the install. They attach very firmly, and adjust very easily.

Universal Level-Ett Ladder leveler

2007-12-26
After years of leveling my ladder with pieces of wood, and never really producing a stable base, I broke down and purchased a pair of these Level-Ett ladder levelers. Definitely worth the money. The push pin allows you to set your ladder to level quickly and securely. Considering how many people are hurt each year falling off ladders, these Level-Etts are well worth the money.

Level Stabilizers

2007-10-18
These stabilizers make it so easy and safe to use a ladder on uneven ground. An excellent product.

Works as Advertised

2008-06-23
Easy to fit; worked perfectly on my 14' extension ladder and sloping yard. Plan to buy a second set for my 28' ladder.

Level-Ett ladder leg levelers

2008-06-05
The Level-Ett ladder leg levelers are a quality product. The only problem I had was installing them on a Keller 24' fiberglass extension ladder as I had to fabricate my own aluminum shims to make them work with the stepped aluminum base brackets of the Keller ladder. The second set I got was much easier to install on a Werner ladder as it's leg base aluminum plate is flat and not multi-level (stepped) like the Keller.

homeowner with 3 levels

2008-06-02
great product and took 15 minutes to install .makes using ladder on uneven ground much safer and quicker to do

these things are great!

2008-04-25
These things are fantastic...have no regrets buying them. If you have a house with a sloped yard on the sides and you need to stand along the side of your house on such a slope..then buy these.

No more ladder crashes!

2008-04-25
This ladder add-on was easy to install on my 25-year-old aluminum extension ladder--just make sure you have a reasonably sharp 1/4" drill bit (and figure it won't be sharp anymore when you're done). The supports may look spindly in the photo, but they are very solid/sturdy. The adjustment mechanism for moving the legs to new positions is really well designed and works even more easily than I expected. The feet have nice thick, rubbery pads that should hold well on both vinyl and carpeting, plus a toothed leading edge for anchoring firmly in sod. I haven't had the opportunity to use the ladder on my stairs yet, but it seems like it ought to do a darned good job. Nice example of excellent American engineering and manufacturing!