Customer Reviews
quality tool 
2008-07-22
This product is very lite but sturdy. It never misses a beat. Best warranty in the business too! The only thing I would change is the way the nails are loaded. That being said I would buy another just like it if something happened to this one!!!!
Pretty Good 
2008-04-03
Heya, great product. Very handy. Haven't had any problems apart from a couple of jams, but that is not unusual with any other gun. Definately recommend this as Bostitch is a very good quality brand.
Not up to snuff.. 
2008-03-25
I received this one last Christmas as a present from my daughter, even though I already owned a Porter-Cable DA250B finish nailer that my wife bought me, based upon my wishes, for my birthday.
Even though the two nailers cost about the same on Amazon, I think the Porter-Cable DA250B is around $168.00, after using the Bostitch N62FNK Finish Nailer, off and on, for less than a month on cabinets and oak trim, I bought new packs of nails for my reliable Porter-Cable DA250B, and finished the job using that.
The Bostitch nailer would constantly jam after about 15-18 nails, bending nails and leaving dents in the wood that had to be repaired later. It seemed that it had at least 1/4 less driving power than the Porter Cable, which meant that I had to use a hand nail set to seat the nails.
Driving larger and longer nails into the cabinet framing was no problem with the Porter Cable, while the Bostitch mostly jammed while trying to do the same thing.
Get the Porter Cable model. You'll save hours of time and frustration, and the nails are readily available at either Home Depot or Lowes.
Great time saver 2007-11-11
This Bostich finish nailer is perfect for the small jobs I have been doing on a new house. Chair rail and wainscoting installations are a breeze with this great tool. Highly recommended. I am using my own air source and it works perfectly.
Consider others 
2007-08-25
I have been using nail guns for 31 years, and purchased three Bostitch nailers this year alone. All have broken down. The gun worked reasonably well, except that the head kept falling off (like my F33). I shipped it back for repair 6 weeks ago. The parts are backordered. I called Bostitch and was told repeatedly that they did not get involved with their own recommended service centers. If they don't, who does? I emailed customer service and did not get the courtesy of any response.
Nails are another issue. They "dimple" pine trim to a greater extent then my other finish nailers. In nailing PVC facia trim, I use stainless steel nails. I had more difficulty getting SS nails for this gun then others I use. Additionally, the nails were exceedingly expensive and hopelessly banged up into short strips upon shipping.
Their lack of reliability, lack of customer service and their notorious attempts to design unusual collating angles in order to force retailers/buyers to use only their nails produces a score of "1" from this reviewer. I haven't found a way to use a gun on a job that is at the repair shop or awaiting nails, and that's the starting point for any tool.
Dykstrgl 2007-07-23
The first time you pick up the Bostitch N62FNK-2, you might wonder if such a lightweight finish nailer (it weighs just 3.8 pounds, the lightest in its class) can really get the job done. But once you pull the trigger and feel the 400 in./lbs. of driving power at your fingertips, those doubts will disappear and you'll wonder how you ever did without it before. Rugged and sturdy enough for virtually any application, the N62FNK-2 delivers fast, clean, accurate results using finish nails from 1 to 2-1/2 inches in length. An oil-free engine means no unsightly stains on your work--a definite plus--and no need for messy lubrication, an even bigger positive. Tool-free maintenance and depth control only add to the allure.
--Carl Thress
Outstanding Finish Nailer 2007-05-15
Purchased this nailer to help install hardwood flooring. The 15 guage nails are important since they hold much better than the lighter 16 and 18 guage. I also own a Porter Cable 18 guage finish nailer and a brad nailler.
The performance of this finish nailer was outstanding - and it is by far the lightest weight tool I own. All of the nails (regardless of the angle) easily counter sunk themselves below surface of the oak flooring for easy filling.
If you are interested in a very good finish nail gun - I would highly recommend this model.
Hardwood floor nailer 2007-03-26
Bostitch N62FNK-2 worked out really well for me. I purchased this to install 154 sq ft of Bamboo hardwood floor. My first attempt, and it worked better then I thought, the rubber caps (profile tips) on the nail head put the nails right in the groove. I was going to rent a nailer and that was a hassle so I needed nailer anyways and it work perfectly for this tongue and groove installation. This is a well thought out product, I highly recommend it.
great, at the start 
2007-02-14
This gun was real impressive the first 3 months of having it, barely ever jammed, light weight, good power. then it started jamming more and more. I won't use it anywhere that a good clean finish is needed due to fear of having a big $#&* blurting out of my mouth as the nail bends over half way and the piece of work is really marred up.
If you can afford to buy a new gun every 5-6 months, then by all means, this is a great nailer, other wise go for one with oil lube and get a good high quality clear oil to put in it.
GREAT PERFOMANCE ,POOR LONGEVITY 2007-01-01
We used to be able to get an angle trim nailer from bostitch that last a lot better than this one .The new one does a great job of shooting nails but tends to self destruct after quite a few thousand nails.Sooner or later you will probably have to replace the firing pin as it will break off. I wish we could still buy the old verson.Another example of Bostitch outdoing themselves trying to make something lighter and yet more powerful.
