Paslode Cordless 16 Gauge Angled Finish Nailer #900600

Customer Reviews

Agree with others on the jamming

2007-05-08
For simple face nailing/finishing work this tool does okay. But try to nail through hardwood and the jams start piling up. I've tried everything recommended here including purchasing new gas and am giving up and heading into the store to get a compressor & nail gun. I'm just plain fed up with this tool. From now on I will only use it for very simple face nailing projects that I want to do quickly without pulling out a compressor...

nice gun

2007-02-15
I do a lot of trim work, this gun is light and compact. I haven't had any problems with it jamming, clearing the nails out is real simple. it's easy to adjust the depth, it's really taken the place of two nailer, i used to use and 18 gauge when nailing trim to jams and the 15 gauge nailing the trim to walls. this does both easily leaves a nice small hole, seems to always drive the nails in all the way, it's a joy, and if you find yourself later on havig to do punchlist, the nails work with thier gas nailer, or even with the dewalt angled finish nailer.

Great Tool

2007-02-10
I purchase a lot of tools, some work good some do not. This has been a great one. Not a single complaint. No hoses, compressor and very light. Highly recommend.

More Convenient For Trimwork Than A Compressor

2007-01-05
I am a remodeler that also does plenty of repair work. This unit has greatly improved the safety of working from a ladder on exterior window trim. I have always preferred a nailer to the hammer on inside trim because it does not 'knock the pictures off' the wall in occupied homes. It is even better now because I'm not dragging hoses through my customers furnished home. I have experienced '0' problems with this tool and am pleased to say that it works better than I ever expected. There are a variety of finish nails available for this tool including Stainless Steel which is excellent for composite materials and cedar.

Finally, no more hoses!

2007-01-02
I bought this about three months ago and have used it almost everyday and I have been very happy with it. It is a huge relief not to have to drag a hose or compressor around a customers house. The only drawbacks are that you cannot use it outside below freezing temps because the gas cells won't work right and you do have to buy the cells for it. Just make sure they have the proper expiration date on them or you will have misfires. The case holds two full boxes of nails and four gas canisters and two batteries. This really is a well made tool.

Paslode cordless 16 gauge angled finish nailer#900600

2008-03-05
I have tried to get cutomer service to assit me for over one year. The company wants to sell the product, however, if you have a problem with your item the company has zero support after the sale. I will never buy or recommend to any one, any product that Paslode sells. If you spend hundreds of dollars and you get a defective item, no help is available after the sale. The techs that have looked at my nail gun can't figure out why it works for 5 minutes ,then the next time you go to use the gun it will not work. So, before you lose alot of Dollars, buy another product that will have customer support after the sale.

Paslode Nailer

2008-02-19
Works very well, even in hard woods. I trimmed a whole house and didn't have one issue with it. Great product!

If it would only work......

2008-02-09
All the same problems everyone else has had, except after my Paslode refurbishment it began shooting nails out of the bottom of the nail holder (about an inch from the tip of the gun). This is not good at all. I had high hopes for this tool and I really wanted it to work.

confused by the bad reviews of this tool

2007-11-16
Bought the Paslode Framing and had such success on the job with it, i considered the finish nailer. Thinking that the finish nailer would be great so taht you are not dragging dirty houses through a home, i read the reviews on amazon and was amazed at the number of poor reviews. However, i went for it and just like the framer, this gun has performed flawlessly. Make good contact with the workpiece and it is as simple as that. Highly recommended!

The best thing since sliced bread

2007-07-21
There is no substitute for the angled pasload BUT it must be kept CLEAN
in order for it to not have problems like any other tool it must be kept clean I cant stress that enough. Avoid putting it on the ground. hang on a latter put it on a table Who wants to constantly bend over anyway????
Mike Carpenters Local 8