Senco PC1010 Compressor, 1 Horsepower PEAK , 1 Gallon

Customer Reviews

great buy

2008-03-25
i'm a finish carpenter and have used this compressor for two years now with no troubles. customers like how quite it runs compared to noisy pancake compressors. it was worth the 150 bucks i paid for it two years ago.

Senco PC1010 Compressor

2008-02-08
The product came on time and it is working great for my needs. That's it.

Very Quiet and Lightweight

2008-01-01
If you are like me and need a compressor for your home shop, this is the one to get. My old compressor was so loud that I would hesitate to use it. This will not drive a framing nailer but has worked just great for my 16ga finish gun and brad nailer to trim out a door and put down some shoe moulding. Light enough to pick up and move around the house with you, works well with one of those 25 ft coiled hoses. Not enough capacity to blow out your shop, but since it's so quiet I don't mind having it run more often. Well made solid tool and definitely worth buying.

air

2007-12-30
I have four compressor's from a 5 hp to this one. I work out of my van and this one will do all that the others will do with out the noise and the weight, PRICELESS!

Great little compressor

2007-11-07
The Senco PC1010 1 gallon compressor was exactly what I was looking for: a light compressor for small jobs. It was between the Senco or purchasing a Paslode cordless. Having the pneumatics already, this was the better choice for me.
The compressor works as expected, popping around 8 to 10 15 g nails before cycling. It won't replace a larger, dedicated compressor but works great for smaller jobs. It weighs about as much as my lunch box!
Very satisfied

light and quiet

2008-06-16
This is a great trim compressor that doesn't tend to drive the clients crazy when it cycles. In the proper application it works great.

I would not recomend it

2008-06-06
I purchased this compressor and I noticed it wouldnt hold its pressure over night. about 6 months later the problem got worse after inspection i noticed it was leaking from one of the welds that held the tank to the frame, right above the foot. I would drain the moisture out of it every time I used it so Im guessing it to be a factory flaw.also the compressor would not drive a 1 inch micro nailflush into a solid stook of wood. Im in the market for another light weight compressor and would not buy this one again

perfect little machine

2008-03-30
I purchased this compressor to help me with door casings and floor molding on a recent home renovation. I was delighted with the performance of this compressor, especially how quiet it runs. I have used pancake compressor before and they make you jump every time they recycle. This machine is barely audible as it hums when it runs versus banging away. I used a small nail finishing gun and the compressor only cycled every five minutes of so. I highly recommend this compressor for its portability, quiet running and reserve capacity.

little compressor that could

2008-03-30
going from the world of contracting to the world of handyman repairs i was looking for a compressor that wouldnt take up too much space. a friend ranted and raved about this little one. its super light. the design is easy to carry for those small jobs and its powerfull enough to shoot 15g finish nails all day. it will fire my framer but im not into burning out tools needlessly. if you're framing for more than a 1/2 hour use a bigger compressor. on top of everything 110$ delivered to my doorstep though amazon.com.

pc1010

2008-03-26
senco is a fine product, but hard to find couplings to get going. Thanx