DEWALT DC410KA Heavy Duty 4 1/2 Inch 18 Volt Cordless Cut Off Tool

Customer Reviews

Good for a battery operated grinder

2006-03-04
I used this grinder to prep metal before and after i weld. Yes as said before, it won't last you all day, but will last about a half hour of steady on and off work. I don't have a garage so i work outside. I have to drag a bunch cables out the house to get power. Having this tool lets me drag one less cable to power cable and i don't have to mess with a cord when using it. Think of it as the same joy when using a cordless drill, its much nicer with no cords. If you don't work in a confined area, this unit will be perfect. Even in confined areas, it won't be bad. I welded a strut tower on a car and i was able to reach most places. Just have a couple of batteries on standby (batteries come off the tool hot). As for the grindings sticking to the case, just vacuum them off between battery changes. The saw will take a cut off disc. In the combo package i got, it came with one. The head can be rotated 90 deg by removing the 4 screws on the front if you need to get into tight places.

Pros:
Cordless freedom
Nice trigger button and trigger lock, no messing with a slide switch
Has plenty of power (until you get near the end of the battery)

Cons:
batteries don't last that long on this thing
length of the entire unit a bit long with battery
RPMs not as high as a corded grinder

Good Battery Life, but won't replace a corded

2006-01-04
I got the DC410 as part of the DC6KITA package. From reading the reviews, I was skeptical about the tool usefulness. I went to Home Depot and purchased a section of 1/2" rebar and a Norton 4.5"X.040" cutting wheel. Upon getting home I clamped the rebar in my vise and took a fresh batter out of the charger. With the new wheel and fresh battery, I was able to cut through the rebar 23 times. On the 24 cut the power just ran out. I rate this at 5 stars because I went into this tool knowing it was not a corded tool. The battery life seems adequate and the portability over the corded is a great bonus. If there was one thing I had to pick as a detraction from the tool, is that the handle's bolt was not molded in the handle at a perfect 90 degrees so the handle does not spin pefectly on it's axis but in a small wobblely circle. Not a big deal.

Now will 23 cuts replace a corded cut off tool? NO. But, this will make an excellent backup and will come in handy when you don't want to break out the extension cord. I actually have 5 batteries so I could in theroy cut over 100 1/2" rebar. That is plenty for most of what I do.

A Big Loser

2005-04-19
I used this tool for about two weeks. Previous reviewer said you cant get metal cutting wheels for it he is wrong, they are readily available at every home center and hardware store- standard 4.5 inch metal cutting wheels.

This tool totally sucks, battery life is horrible I cut 3 pieces of 1/2 rebar and the battery was spent. I cut thru 18gage
sheet metal and the battery lasted less than 40 seconds.

All the metal shavings you cut get magnetically attached to the tool body and get sucked into the motor, which will lead to disaster.

Also for cutting applications the handle faces the wrong way and is not comforable to use.

BADDDD tool!!!!!!1

Out of stock

2005-04-08
Ordered 9 days ago, just got email saying Updated delivery estimate: April 13 - April 22. And it was in stock when ordered. And they should have emailled me a week ago, so I would not have wasted this week waiting, idiots don't want my business

Good Tool But

2005-01-13
I recently purchased this tool from Amizon.com but there is one problem. You can not purchase the metal cutting wheel. this was the only reason I made the Purchase. Now I have a Problem.

Dewalt Chordless Grinder

2008-05-27
This product was just what I needed, it works well and was delivered in a timely fasion.

Great deal, Great tool

2008-03-15
this tool works great. came with very useful optional guards. had no problem cuting through 8 guage pipe, handles very well. and has the ability to rotate the head(silver part) to any of the 4 directions on the handle. i'm very happy!!

Great Grinder on the fly

2007-04-12
I love this thing. I can use it in the yard, at the race track, anywhere cordless. Battery life is reasonable and it works great with flapper disks.

Excellent cutoff tool for quick jobs

2007-01-11
I have a Dewalt 18 volt hammer drill that I love, so when my Makita angle grinder died, I bought a Dewalt replacement. I like the tool. It is easy to change blades and flexible in use because of the 18 volt battery pack. Power and torque is good for most cut off and grinding jobs, but the tool drags a bit during use with a wire brush for jobs like heavy paint stripping. The battery life is a factor with heavy use--more than with my Dewalt 18 volt drill. To be fair, the tool is not designed for this type of use. I would highly recommend this tool for a user who needs a fast and flexible cutoff tool or for a quick grinding job. For longer grinding or stripping jobs get a Dewalt corded angle grinder.

DeWalt 18 volt Cordless Angle Grinder

2006-11-12
I have used this grinder to cut through rebar and for general grinding applications and it works great. It is very comfortable to use and well balanced. Just one thing, make sure to use a newly charged battery because it will run down older batteries rather quickly. It may not replace a corded grinder for heavy duty grinding applications, but for all purpose cutting and grinding for small to medium jobs it works very well.