All in One Clamp RP 8 Inchx 9 Inch Router Plate
Normal Price:$33.99
Our Price:$26.99
Availability:Usually ships in 24 hours
... For more information or Buy from Amazon.com ...
Manufacturer: E. Emerson Tool Co
Model: RPXXX
Binding: Tools & Hardware
Publisher: E. Emerson Tool Co
Label: E. Emerson Tool Co
Features for All in One Clamp RP 8 Inchx 9 Inch Router Plate:
- Router tracks perfectly along the straight edge
- Base locks onto the t-track
- Keeps your router in control
- Eliminates router kick for a smooth cut
- Crystal clear polycarbonate to see your cuts
Small Picture
Medium Picture
Customer Reviews
great tool 
2008-09-07
I got this several months ago. With my cordless circular saw, it has been a great convenient, mobile set-up.
Junk 
2008-02-05
First, none of the many pre-drilled holes fit my very common Porter Cable router. Second, although there is a hole for a screw to attach it to the T-track in the clamp, one is not provided. But thirdly and most frustratingly, the slot in the plastic for the clamp's track to go through is too tight so it gets stuck. I twice got my router halfway through the piece and simply could not budge it any farther. I threw the damn thing away, another $20 wasted.
no slide 
2008-01-20
the router and circular saw slide are hard to attach to the saw in particular. both do not slide on the rail with out forcing them which results in a bad cut or rout job. would not buy these again or recommend them to anyone.
ATLNorm 
2008-01-10
I bought the router plate, the wide jaws and the 50" clamp a few months ago, for a particular project requiring lots of dadoes in MDF. The whole system works as advertised, and is well worth the modest cost. A couple of notes--I probably over-tightened the clamp, causing a piece of the cam-lever to break. It hasn't ruined the clamp, but I assume the overall clamping pressure has been diminished. Second, I used a cheap router bit and pushed it so hard that I melted the router plate. That said, I sent a simple email to the manufacturer inquiring about replacement parts (and explaining the problems, even admitting my responsibility), and in less than two hours, the company responded with an offer to replace the parts (no cost). That's customer service.
Great product, and a great company that stands behind its product.
Really Really Poor 
2007-10-28
I ordered this item some time ago, and each time I check the shipping date it goes further and further back. If the item is truly not in stock, to tell people it will ship in 4-6 weeks when you know it will not ship in that time frame; is deceptive and bad business. I find Amazons response to this issue completely unacceptable, and I hope you do too.
A definate improvement over the clamp by itself 
2007-09-27
The E. Emerson Tool Company RP All-in-One 8-by-9-Inch Router Plate tracks perfectly along straight edges and eliminates router kicks to create smooth, steady cuts. You can watch your cuts through the crystal clear polycarbonate surface, and all you have to do is lock the plate into your T-track for a secure fit.
too much to pay for plastic 
2007-09-25
Beware this item is 100% plastic. The one I bought was warped. The "machining" was poor quality with every hole in the plate having a corresponding warp in the plate itself. I immediately returned it.