Micromat TechTool Pro 4.6.1 Diagnostic Utility Macintosh Universal DVD UPGRADE

Editorial Review
Upgrade for TechTool Pro 4 owners. This is the eagerly anticipated Universal Binary version of TechTool Pro that will run on both Intel and PowerPC-based Macs. It fully supports the hardware changes introduced to the Macintosh platform with the introduction of the new MacIntel chipsets. All of the features of the program that were previously available for PowerPC based Macs are available for Intel-based Macs as well. This includes the innovative eDrive (emergency startup partition) feature of the program, found nowhere else. In addition to Universal Binary support, the new release will also include some significant program enhancements, including improved Disk Controller test routines. Unlike most application software, more than a simple re-compile of the program was required to support the new Intel-based Macs. Because TechTool Pro works with the computer hardware at the lowest levels, it was necessary for Micromat to completely re-engineer the software from the ground up. In order to support the new models, Mac OS X 10.4 (Tiger) is required to run the program.
TechTool Pro 4.5.1 ships on DVD for both PowerPC and Intel-based Macs. The DVD will automatically boot the correct system version.
No product comes close to TechTool Pro for ensuring that all of your hardware and software is operating at peak performance. No other software gives you the peace of mind that comes from knowing that your valuable data is protected by the latest technology. With a single mouse click, TechTool Pro can automatically run a series of sophisticated tests that will troubleshoot almost any problem you are having with your Macintosh.
Cached date: AWS Called=true

Customer Reviews

Don't be fooled by Micromat !!

2008-06-06
Unless you want to end up paying for "updates" that Micromat magically renames to upgrades, run away! I too thought I was buying "Techtool Pro VERSION 4". But even though the box you'll see here has "Version 4" all over it in bold red letters, the truth is that I had really purchased one single revision of VERSION 4. It stopped working 2 months later, and when Micromat released an update to TTP4 that was supposed to make it work with OS X 10.5, it was going to cost me even MORE money. Yes, Micromat wanted me to pay to "upgrade" from "Version 4" to "Version 4". Note that here on Amazon, both the full version and the upgrade version boxes are identical. And the upgrade is only $18 less than the full version. They both say "Techtool Pro Version 4", but you have no idea what revision of the full version you're actually buying. If you look for release dates on the "news" portion of Micromat's web site, you'll quickly conclude that it must be 4.6.1, because the next TTP4 announcement you see, 4.5.2, was released way back in Nov. '06. Revision 4.5.3 is suspiciously missing, even though it was released just 4 short months before 4.6.1. So if you paid full price for 4.5.3 on its release date of 7/27/07 and you wanted to be able to update your software in November, get out your wallet, becuase Micromat is fully prepared to pretend to not know the difference between an update to your existing "Version 4" and an upgrade to an actual new version, like "Version 5".

tech tool review

2007-01-05
my mac shut down and I couldn't boot. I used tech tool pro to diagnose faulty sectors which indicated a bad hard drive. The tech tool allowed me to boot up. I am curious if Disk Warrior would be a better product, but I haven't used it.

A Must Have Utility for Optimization. 2nd tool in my utility toolbox

2006-09-01
I recommend this product for optimizing any drive and volume structure repairs and much more in conjunction with Disk Warrior for maintaining and repairing the directory and Drive Genius for a complete device (drive) backup. This is a multi-architecture DVD version. It will allow use on all Macs, not just Intel based. I purchased this before my intended macbookpro order. Have not used on Intel based Mac yet. I use it for its improved optimization features mainly.

Lots of great features for testing and maintaining optimized drives. THE ONLY CHOICE for optimization in my opinion. Always backup first. The boot partition feature is a nice feature but I highly recommend using a LaCie or other trusted external drive to boot from and do maintenance. It's just easier, faster, and safer. Not to mention an uninterrupted work flow if you still want to do a few things on your Mac while this process is running.
Before Tiger, I was using Disk Warrior optimization which was a forced thorough but extremely safe optimization. Since Tiger indexing no longer permitted Disk Warrior optimization I moved on to TechTool Pro 4.04. It was great on external drives, but unfortunately not as thorough in pre-optimization scanning as Disk Warrior. I had developed bad blocks on my PowerBook G4 1g 60g drive. So after optimization, it wouldn't boot. Terrifying at the time, I was able to recover almost everything. After Apple sent a replacement hard drive (in warranty replacement 5400rpm) I swapped it for a 7200rpm drive and used the apple drive as a backup in a firewire external enclosure using Drive genius to duplicate the drive. (NEVER USE drive genius for optimization of boot drive, drive will not boot after optimizing) Drive Genius does a great job of volume and device copy or cloning. It is not bad for creating and moving partitions without erasing existing partitions.

Which version is this? The original was dreck . . .

2006-02-05
I understand that there are still some REAL big version issues with Techtool Pro 4 . . . Eeven though the product says it's X compatible, until you get beyond version 4.0.4, it's not Tiger (Mac 10.4) compatible, etc. (I got burned this way - it says it creates a bootable cd, but when you get it home, and opened, it says this won't work with Tiger). Which version is this?

After Norton Utilities crashed my Mac

2005-09-05
Norton Utilities crashed my Mac and it took about a week to get it back. After that I looked for a utility program for the Mac. I can't say it has performed any restoration because I haven't had any crashes or file corruption. But it has more features than any other disc utility I've seen and the amount of tests it makes is impressive. I have a lot more confidence in it than other utility programs.

TechTool Pro 4

2004-09-15
Upgrade for TechTool Pro 4 owners. This is the eagerly anticipated Universal Binary version of TechTool Pro that will run on both Intel and PowerPC-based Macs. It fully supports the hardware changes introduced to the Macintosh platform with the introduction of the new MacIntel chipsets. All of the features of the program that were previously available for PowerPC based Macs are available for Intel-based Macs as well. This includes the innovative eDrive (emergency startup partition) feature of the program, found nowhere else. In addition to Universal Binary support, the new release will also include some significant program enhancements, including improved Disk Controller test routines. Unlike most application software, more than a simple re-compile of the program was required to support the new Intel-based Macs. Because TechTool Pro works with the computer hardware at the lowest levels, it was necessary for Micromat to completely re-engineer the software from the ground up. In order to support the new models, Mac OS X 10.4 (Tiger) is required to run the program.
TechTool Pro 4.5.1 ships on DVD for both PowerPC and Intel-based Macs. The DVD will automatically boot the correct system version.
No product comes close to TechTool Pro for ensuring that all of your hardware and software is operating at peak performance. No other software gives you the peace of mind that comes from knowing that your valuable data is protected by the latest technology. With a single mouse click, TechTool Pro can automatically run a series of sophisticated tests that will troubleshoot almost any problem you are having with your Macintosh.

Doesn't work on newest G4 Powerbooks

2004-09-11
I have always had good success with Norton Diskdoctor on various Macs and OS's, but ran into a problem that it couldn't fix. So I bought TechTool Pro 4 through Amazon/J&R because the reviews said it was a great program. What a mistake. Micromat doesn't tell you it doesn't work on the newest Macs. I'm using a 1.33 GHz 12 inch powerbook and I can't make a bootable virtual CD or do a cold boot from their CD. After going around with technical services at Micromat 4 times by phone and email, someone there finally acknowledged the program doesn't work on this new Powerbook, blaming Apple. He offered a fix on VersionTracker, but the fix was nowhere to be found. At this point I'm past my 30 day guarantee. In my last email, I explained my problems, including that I was about 40 days from purchase, They said send us the receipt and a copy of the email technical trail, and they will send me a new CD that will work with my machine (apparently they fixed the bug, but you can't download the fix nor do they tell you when you call). I have now faxed all the documentation to them Twice, and have received no response. Since I wanted this to boot off the CD or to make a virtual CD to boot the system, the existing CD is worthless. I wasted my money. And I'm frustrated that I wasted so much time on them. Last product I buy from Micromat.