Customer Reviews
Good product & price 
2008-04-25
Great product, had exactly the Torx bit I needed as well as many more. the case design holds the bits & driver securely. Magnetic tips are a plus.
My others sets are going in the trash..... 2008-03-29
I wanted to open up my iPaq handheld device, to repair its speaker. To do so I needed two very small (T5 & T6) torx heads. I have several sets of small screwdrivers, that I have used over the years for many small jobs, but none had a T5 head. So, after looking at various sets on the Internet, I bought this one. I am glad that I did. The case is about 7 inches long, sturdy, with a nice sliding lock. The locks on my other small sets are overlapping bits of plastic that either got so loose that they're useless, or were so tight that when you tried to open the box you had to exert quite a bit of force -- sometimes the darn thing opened so suddenly that the drivers came out. In this case, you slide the lock, and open the box. Simple. The handle and the bits are well-secured in snap-in holders. These work fine but, I suspect, might loosen (or break) with time. We'll see. The red/black part of the handle (see item photo) is about 3.75 inches long -- long enough that (at least in my hand) the top part of the handle sits comfortably in my palm, while my fingers grip further down. You don't feel like you're holding a teeny-weeny tool - it feels quite robust. The top part of the handle rotates, and the lower part (where your fingers grip) is rubberized; these two features make it very easy to control the driver when you are working. The metal part of the handle is magnetized. This not only means that a bit stays put in the handle, it also means that a screw "magnetically attaches" to the tip of the bit. This makes removing & re-inserting these tiny screws so much easier. I used the tool to open up, and re-close, my iPaq - it worked like a charm. My only regret is using those other sets of small drivers for so long. Never again. They're going into the trash. This is a 5 star tool.
recommended seller. 2008-01-07
I highly recommend this seller, item was shipped in a timely fashion and in great condition. Will love to do business with you again.
Not for serious computer repair 
2007-12-03
I bought these tools to remove the screws from a hard drive on a dell notebook. A local computer shop wanted $60 to do the job. The screws are very small phillips head. One of the phillips head tools in this set was small enough, but it couldn't get a good "bite" on the screw. I tried one of the small flat head tools. I twisted that tool. So its lost.
However, I ended up draw filing the original phillips head tool so that it didn't drop so deep into the screw. That worked! These tools did save me almost $50. I would say they are good for light duty work. Good for a hobbist, but not for a lot of serious work.
Good 2007-11-09
We bought these to be able to swap parts on Motorola Razors. The torx heads and screwdrivers were small enough to do that. Those screws are really small.
very convenient 
2008-07-10
There is a huge variety of bits and they are all magnetical. The case is very durable along with the screwdriver that comes with it. The problem is that the bit tips are very weak and bend REALLY easy. I understand that you should be gentle while using small bits like this, but these tips just hardly have the strength to take out commercial screws and they bend way to easily. They should have coated the tips in something stronger. I probably wouldn't recommend these to a friend.
Nice set 2008-06-21
Great variety. Nice quality. I would recommend this. I used it to open a laptop hard drive.
great tool 2008-06-19
great tool to work on notebooks... i bot this to open my notebook and reseat the memory card...it makes the job fairly easy...
Lots of sizes, but missing a few key security bits. 2008-06-11
I bought these as part of a combo, and they were only a few bucks considering that I was already paying shipping from the seller.
They've got all the itty-bitty torx bits needed for my motorola phones, as well as the tiniest hex bits I've ever seen (anyone know what actually uses a 0.7mm hex drive head?)
There are 2 things I would prefer to be different however. Firstly this is a 4mm drive set, meaning that the only tool I have to hold the bits is the one that came with them. It's not a big deal, but 1/4" drive would have been great (although it would probably encourage overtightening of previously-mentioned super-small bits and would result in breakage).
The second thing I would have liked would have been some tri-wing bits. These bits are used on a good number of electronics and are hard to come by in the super-small sizes needed. In my opinion this kit should replace some of the Philips or Flathead bits with other less common bits as it's pretty easy to find the Philips and Flatheads in very small sizes.
more useful than I thought it would be 2008-06-05
Initially I needed the T-5 torx bit, but I use this set more and more lately.
The driver part has a metal shaft and a plastic/rubber handle with a swivel top. It is more stiff than I thought, and while not a professional product, I doubt this will break anytime soon. The bits are not standard 5mm bits but a reduced 4mm size, so they are not interchangeable with most drivers.
My set has:
torx 20, 15,10, 9, 8, 7, 6, 5, 4, 3
hex (allen) 4mm, 3, 2.5, 2, 1.5, 1.3, 0.9, 0.7mm
flat screwdriver 3, 2.5, 2, 1.5, 1.0
PZ1, PZ0
Philips screwdriver PH1, 0, 00, 000
and the driver.
