Bostitch MCN 150 StrapShot Metal Connector Nailer
Normal Price:$174.99
Our Price:$222.31 (Sale Price!)
Availability:Usually ships in 1-2 business days
... For more information or Buy from Amazon.com ...
Manufacturer: Bostitch
Model: MCN150
Binding: Tools & Hardware
Publisher: Bostitch
Label: Bostitch
Features for Bostitch MCN 150 StrapShot Metal Connector Nailer:
- Exposed nail tip places fastener point directly into connector holes for a faster, more precise application
- Drives 1-1/2-inch Strapshot fasteners as well as all other paper tape collated metal connector nails (.131 - .148 diameter)
- At 4.6 pounds, the tool is up to 50% lighter than competitive models
- In-line magazine offers improved balance for added maneuverability
- Compact design fits easily into hard to reach spaces; 7-year warranty
Small Picture
Medium Picture
Editorial Review
Today’s homes are stronger than ever. More knowledgeable homeowners, natural disasters, and stricter building codes have led the industry to adopt better ways of building houses. One important result of this has been the massive rise in the use of metal connectors. These metal connectors, whether it is in the form of a hurricane tie, joist hanger, or stud plate tie are used to strengthen the weaker joint areas of a home. Their popularity has given rise to a new necessity on the jobsite, the nailer to attach all of these metal connectors.
The Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) is the perfect tool for all types of metal connectors. Its exposed nail tip places the fastener point directly into connector holes for a faster, more precise application. It has a built in safety that prevents the tool from firing when not placed properly into the connector hole. The Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) drives 1-1/2-inch, 35 degree Paper Tape Metal Connector Nails to secure any type of metal connector plate. These nails come specially hardened to ensure that if there is a misfire it can still drive through the metal connector plate safely.
One of the features that set the Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) apart from similar nailers is its size. Its compact design fits easily into hard to reach spaces including 12 inches on center studs (MCN150 only 10-1/2 inches tall). The tool is up to 50% lighter than competitive models for reduced fatigue and added maneuverability. The in line magazine also helps maneuverability by fitting into corners easily. Its low nail lockout feature prevents jams by preventing cycling with less than 5 nails for added safety. The tool also comes with hardened steel wear guards to protect the tool and adjustable exhaust to conveniently direct air away from the user. Finally, Bostitch has included a carrying case and our exclusive 7-Year Limited Warranty.
Cached date: AWS Called=true
Customer Reviews
best thing since sliced bread [almost] 
2008-06-15
Bostitch MCN-150 StrapShot Metal Connector Nailer If you have nailed joist hangers by hand or with a palm nailer, this is the answer. Fast.really fast 80 hangers in about 10 minutes and Safe
A "I don't know how I lived without it" tool 2007-12-14
I've had the Bostitch MCN-150 for just about a year now. In that time it has paid for itself two or three times over. One house, with lots of straps and hangers and one deck rebuild with a couple hundred joist hangers is all it took. This tool can do in an hour what it would take a person all day to do by hand. And it saves your fingers in the process. Anyone who has tried to set tico nails in tight spaces knows what I mean. I really can't stress the time savings enough. The size of this gun is great, you can get into some amazingly tight spots and because of the innovative tip design, you can shoot at less than ideal angles.
That being said: There are two cons to this tool. It only holds small clips of nails (24, i think) so you are constantly reloading, but even with a clip of 50 you would be reloading often because of the speed that you can shoot. When nailing off long Simpson type straps, you really notice this. The other con is the fact that you can only shoot 1.5" nails. Which is a bummer here in California, where longer nails are often required. But apparently they now have the MCN-250 which addresses both of these issues. I will be ordering one of those also.
I have also used the Hitachi NR65AK, which is good, but I really think the Bostitch is better and for the price of the Hitachi you could order both Bostitch models and still be in the same ballpark.
One last thing. You can use other companies nails in a pinch. The manual stressed using only Bostitch Nails, but I was forced to use Senco at one point. They work OK but jam in the track occasionally due to burs on the nails. But they'll get you through.
why havent you bought one yet... 2007-10-08
we love this little guy...makes quick work of decks, roof ties, hurricane straps, and the like...you will never want to frame without it....we got ours through HD Contractor services for $219...so far the unit is flawless and durable..and the case keeps her ready and clean between jobs.
great time saver 2007-05-21
I am very happy with this tool. The nails are expensive and I can only get galvaized ones from Lowes. Generic nails do not fit this tool.
Love It! 2006-06-12
I had been using an N88RH-2MCN for my metal connector work. As you know, the 2MCN is a standard framing nailer with a locator tip. While it works fine, it's big and heavy and doesn't always fit between joists and in tight places. The MCN150 solves that problem. It's small & light comparable to a 15ga nailer, almost half the weight of the 2MCN and it fits into tight spaces more easily. The MCN150 does not use a locator tip, but rather uses the exposed nail tip to guide you into the hole. I've had it now for about 3 months and ran several thousand nails through it without incident. I would highly recomend this tool if you do frequent metal connector work. Just remember that all metal connectors do not call for 1 1/2" nails. For longer nails, you need another gun. It comes in a nice plastic fitted case.
