Denali 136 Piece Titanium Contractor's Drill And Drive Bit Accessory Set

Editorial Review
Denali's 136-piece titanium drill and drive accessory set was designed to meet the everyday needs of contactors and serious do-it-yourselfers. The set features titanium-coated drill bits for superior strength and durability, as well as a complete lineup of quick connect accessories for fast and easy bit changing. It's packed into a heavy duty impact resistant case that will stand up to the daily beating from trucks, jobsites, and storage closets. Also includes 2 removable screwdriving bit cases that easily attach to your belt or pocket for fast and easy access.

What's in the Box

Seven hex: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, ¼ inch
Seven Phillips, sizes 0, 1 (2 pieces), 2 (3 pieces), 3
Seven T, sizes 10, 15, 20, 25, 27, 30, 40
Three Pozi, sizes 1, 2, 3
Six slotted, sizes 1/8, 5/32, 3/16, 1/4 inch (3 pieces)

Thirty four 1-inch bits with bit box:

Ten T, sizes 8, 9, 10, 15, 20, 25, 27, 30, 35, 40
Six Phillips, sizes 0, 1 (2 pieces), 2 (2 pieces), 3
Five slotted, sizes 1/8, 5/32, 3/16, 7/32, ¼ inch
Five hex, sizes 1/8, 5/32, 3/16, 7/32, ¼ inch
Six square, sizes 1, 2 (3 pieces), 3 (2 pieces)
Two 2-1/4-inch bit extensions

Twenty seven 2-inch bits, sandblasted finish:

Eighteen hss drill, titanium coated, m2, fully ground, round shank, sizes 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 3/32, 15/64, 1/4, 9/32, 5/16, 11/32, 3/8 inch
Seven hss drill, black oxide, m2, fully ground, hex shank, sizes 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, ¼ inch
One 120mm magnetic bit extension
One 80mm magnetic bit extension

Plus:

Four 3-inch (L) bits
Six ¼-inch dr. 6pt. socket, sizes 5/16, 3/8, 7/16, 1/4, 9/16, ½ inc
One chuck
One ¼-by-1/4-inch/50mm bit adapter
One 3/8-by-1/4-inch/50mm bit adapter
Three nutdrivers, sizes 1/4, 5/16, ¼ inch
Two bit stoppers
Blow-molded case

Customer Reviews

Great tools for the price!, Really great!

2008-10-02
Denali must have stepped up their QA since all the negative comments because I have a rock solid set that the rest of my work crew is envious about. Great quality for the price. Heck Great quality if it were triple the cost.

Excellent Product

2008-05-30
This has Everything you can possably need. When I opened it up I was amazed. It' great to have it all right in front of you at your finger tips. I have used it 3 times so far and no complaints. For $30.00 bucks and free shipping you can't beat this no where.[ASIN:B000NJEU54 Denali 136-Piece Titanium Contractor's Drill And Drive Bit Accessory Set]

Quantity, not Quality

2008-04-05
This set has tons of drives, many of them duplicates, so you shouldn't need to buy any more for some time. There are not 136 unique items. I think I counted 27 phillips head drives for example. I think it's a pretty good example of quantity vs. quality. The case hasn't fallen apart like others have reported, but it is cheap and I don't expect it to last for long. Still, for the price, you get lots of stuff. The titanium parts total about 8. Don't be fooled into thinking they are all titanium. Still, all in all, not a bad deal.

Unacceptable Quality!

2008-03-15
The Denali 136-Piece Titanium Contractor's Drill and Drive Bit Accessory Set was on sale as a Gold Box Special recently. For the price, I figured that even if the drill bits and the accessories weren't of the best quality (I didn't expect them to be), that I should still be able to get more than my moneys worth out of most of the set. I was wrong.

The set arrived and the case was in good condition. Upon opening the set, I discovered a few bits loose in the case from being shipped. That wasn't a problem since that seems to happen on most sets packaged this way. The finish on the tool and drill bits (especially the titanium drill bits and sockets) looked good. At that point, I was pleased with my purchase and I had a couple of small projects to do so I would be using the set soon.

I needed to put a new registration sticker my vehicle's rear license plate, so I grabbed this kit and my Makita driver to do this small job. I needed to remove the two bolts from the license plate frame (7/16" bolt heads) in order to remove the rear license plate and remove the old registration sticker before applying the new one. I grabbed the 7/16" socket from the Denali set, connected it to my cordless driver and was ready to get this job done. To my disbelief, the 7/16" socket would not fit on the bolt head! I don't know if the size was cut wrong or if the socket got over-plated with chrome, but there was no way it would fit. I tried the sockets on either side of the 7/16" socket and, of course, one was too loose and the other too tight. I just shook my head and went back upstairs to get a Craftsman 7/16" socket and then proceeded to finish this small task. I wasn't happy that the socket was so out of spec that it was unusable since a already had a full mechanic's socket set so no big deal, I still figured I could use the rest of the bits so I wasn't too disappointed.

I was looking forward to using the titanium drill bits (the main reason I purchased this set), so I grabbed the set to do another small project. I had received a product that had the holes in the wood drilled too far apart for another piece to fit, so I filled the holes with industrial strength hot glue and let it sit for a week before re-drilling the holes. I grabbed the 1/4" titanium drill bit and chucked it up in my cordless Makita drill. I had already remarked where I was going to drill the two new holes and used a center punch to mark the spots. I didn't have the wood piece in a vice since the wood wasn't hard and it would be q quick job just to drill the two holes.

When I started drilling the first hole, I was disappointed that the titanium bit didn't just auger right into the would. I had to apply a little more force and it took a little longer to drill the hole to the proper depth. By now, I'm starting to get unimpressed with this set. I went on to drill the second hole and it drilled much like the first one. When I went to assemble the metal piece that I had to re-drill the two holes for, I was shocked to find that the holes were too large for the metal piece! I am meticulous about measurements and even used digital calipers to determine the proper hole size - and even used a drill bit that was just a hair undersized so the metal piece would be a very snug fit.

I went to unchuck the Denali 1/4" titanium drill bit and as I was doing that, I noticed that the tip of the drill bit looked like it wobbled a little. Once I had removed the drill bit I rolled it across a flat surface and the 1/4" titanium drill bit wobbled as it was rolling. The drill bit was out of round! That was inexcusable - no matter what the cost of the set was. I removed the rest of the Titanium drill bits and rolled each of them across a flat surface. I discovered three other bits that also were out of round - one wobbled so badly that it wouldn't even roll across the flat surface.

I was going to have to refill the holes I had drilled in the wood and re-drill proper sized holes at a later date. I purchased the Denali set primarily for the titanium drill bits and I could always use some extra driver bits, however, twice I tried using this set and twice I was let down. The quality of the set I received was so poor; it was worthless to me. Drill bits that weren't straight and a socket that was too small to fit over a bolt of the same size just confirmed to me that my set was a piece of junk! Based on what I had discovered, the only items that MIGHT be useable would be the driver bits. Even with the Gold Box price, it wasn't worth paying that much just for the driver bits - which may or may not have been straight or hardened correctly.

Even though it was a pain to do, I packed the set up and returned it to Amazon for a refund. Since I didn't have the outer cardboard sleeve the set came with, I'm only entitled to receive half of my purchase price as a refund. As far as I'm concerned, I'll take the half and never again buy a Denali brand anything! It's possible that I just got a bad set, however, there was no excuse for the socket not being the right size. That indicated to me that the quality control at Denali was virtually nonexistent. This wasn't a complicated product with a motor or moving parts - and still they got it wrong. As far as I'm concerned, the Denali brand tools are worthless (at least to me). Your mileage may vary.

find it is a good value for the $30 price

2008-01-25
I was impressed with this product upon opening the box. Now as I have used the bit's, I am still impressed.

I find it is a good value for the $30 price I paid for it. The travel case was much maligned by others. However, I find it is a much better box than any others I have seen of this type. I must be fortunate as the latches and boxes are all still performing well.

The specialty adapters and bits are great. These are not common with other sets. Oh yes, the everyday bits are here too, in spades. Your cost averages about a quarter for each bit and the cases are free. Can't beat it! If the case goes bad, throw it away. it is Still a good deal!

Nice set of bits, bad carrying case.

2008-01-20
Denali's 136-piece titanium drill and drive accessory set was designed to meet the everyday needs of contactors and serious do-it-yourselfers. The set features titanium-coated drill bits for superior strength and durability, as well as a complete lineup of quick connect accessories for fast and easy bit changing. It's packed into a heavy duty impact resistant case that will stand up to the daily beating from trucks, jobsites, and storage closets. Also includes 2 removable screwdriving bit cases that easily attach to your belt or pocket for fast and easy access.

What's in the Box

Seven hex: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, ¼ inch
Seven Phillips, sizes 0, 1 (2 pieces), 2 (3 pieces), 3
Seven T, sizes 10, 15, 20, 25, 27, 30, 40
Three Pozi, sizes 1, 2, 3
Six slotted, sizes 1/8, 5/32, 3/16, 1/4 inch (3 pieces)

Thirty four 1-inch bits with bit box:

Ten T, sizes 8, 9, 10, 15, 20, 25, 27, 30, 35, 40
Six Phillips, sizes 0, 1 (2 pieces), 2 (2 pieces), 3
Five slotted, sizes 1/8, 5/32, 3/16, 7/32, ¼ inch
Five hex, sizes 1/8, 5/32, 3/16, 7/32, ¼ inch
Six square, sizes 1, 2 (3 pieces), 3 (2 pieces)
Two 2-1/4-inch bit extensions

Twenty seven 2-inch bits, sandblasted finish:

Eighteen hss drill, titanium coated, m2, fully ground, round shank, sizes 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 3/32, 15/64, 1/4, 9/32, 5/16, 11/32, 3/8 inch
Seven hss drill, black oxide, m2, fully ground, hex shank, sizes 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, ¼ inch
One 120mm magnetic bit extension
One 80mm magnetic bit extension

Plus:

Four 3-inch (L) bits
Six ¼-inch dr. 6pt. socket, sizes 5/16, 3/8, 7/16, 1/4, 9/16, ½ inc
One chuck
One ¼-by-1/4-inch/50mm bit adapter
One 3/8-by-1/4-inch/50mm bit adapter
Three nutdrivers, sizes 1/4, 5/16, ¼ inch
Two bit stoppers
Blow-molded case

About Denali
Named after the tallest mountain range in North America, Denali tools stand above the rest in providing an exceptional blend of quality craftsmanship, professional-grade features, and customer value. All homeowners, hobbyists, do-it-yourselfers, and price-conscious contractors will appreciate Denali's design and functionality. Denali products compliment one another and will be an indispensable and long-lasting addition to any home or workshop. Our products undergo rigorous third-party testing to ensure high performance standards. Denali tools are available exclusively on Amazon.com.

Very Nice Set 2008-01-16
This was very well packed by Amazon.

It has a very nice assortment of bits and is a great addition for the new lithium-ion drill I received for Christmas.

The bits are good quality and the case is nice and keeps it all well organized.

Tool kit 2007-11-30
The tools were nice, but the case had a broken latch so I can't give it as a gift as I had planned. I guess I could have returned it, but what a pain.

drill/tool set review 2007-11-05
good set of drill attachements. Probably the best drill set you could buy for under $30. Would definitely reccommend.

Great set, mediochre carry case 2007-11-05
I bought this set to make sure I have everything I need for drilling and driving screws. The set gives me that and more! It's really a great combination of accessories that would be difficult to find for anywhere near the price of this one. The downfalls to the set are first off that it appears the set was stored in a damp place or somehow got water in it because a few pieces are rusty. The second is that the case is cheaply made. It has a place for everything but it doesn't all fit snuggly and some items fall out easily when you open the case. Neither was enough reason to be concerned about but if they are items you would worry about keep them in mind.