Alden Grabit Broken Bolt and Damaged Screw Exractors, 4 Piece Set

Editorial Review

Features and Benefits:

Contains 4 tools to quickly remove screws #4- 24 and bolts No. 10 - 3/8"
Easy to use with quick connect chucks and hand drills
Made of high speed tool steel for long life
Deep serrated edges - biting action creates greater torque helping to remove long screws
Self centering drill tip - only one tool required for extraction

Remove damaged screw heads and extract free spinning screws with GRAB-IT! No other screw extractor removes damaged heads and extracts free spinning screws! This set extracts screws easily from wood, metal or plastic and removes screws made of any alloy, including soft screws. The applications are infinite! Automobiles, toys, furniture, appliances and more!

Cached date: AWS Called=true

Customer Reviews

Worked perfectly for me

2008-10-11
I had an entire kitchen full of rusted and stripped screws, all of which needed to be removed and replaced.

The Grabit worked beautifully for me. It was merely a matter of adjusting the torque on my drill and working on each damaged screw slowly and deliberately.

24 out of 24 damaged screws removed ... I consider that a great product.

NONEXISTANT

2008-10-10
The extractor set has not arrived. I called to report a money clip was shipped but not the extractor set. She said it would go out right away?

Did not work as advertised

2008-10-09
Purchased this for my father who was planning to dis-assemble a wooden deck held together with phillips head wood screws. The Alden Grabit Broken Bolt and Damaged Screw Exractors would not remove the phillips head wood screws after several attempts on several screws.

Unscrewed

2008-10-09
Alden Grabit Broken Bolt and Damaged Screw Exractors, 4-Piece Set
Pros-Does what it says. good price.
Cons- Doesn't always drill the hole for the extractor. mostly I think
that due to the lack of surface for the bit to grab. Wish there were more sizes.

Saved money

2008-09-20
It looked like I was going to have to replace the plastic refrigerator roof vent cover on my camper. While resealing seams on the campers roof I discovered the vent cover could not be removed because the head of one of the recessed screws securing the vent was so corroded the metal was crumbling. I thought I would have to break the vent to remove it then replace the mounting plate and vent cover - cost about $75. A contractor friend suggested I try Grabit. At first I had difficulty. The side of the bit which the directions say will burnish and make a recess in the screw head didn't do the job. So, I sank a small pilot hole with a standard drill bit and then used the removal side of the Grabit bit. It worked the first time. Now all I need is to replace the screws not the vent.

Better than expected

2008-09-08

Features and Benefits:

Contains 4 tools to quickly remove screws #4- 24 and bolts No. 10 - 3/8"
Easy to use with quick connect chucks and hand drills
Made of high speed tool steel for long life
Deep serrated edges - biting action creates greater torque helping to remove long screws
Self centering drill tip - only one tool required for extraction

Like a champ

2008-09-03
I have been wanting these easy-outs for some time now, but never needed to use them. Stripped a small screw while working on my bike...that thing was like butter. Used the Alden the day I got it in the mail. Instructions were thorough...product was easy to use...screw backed out real smooth.

A++ in my books...great purchase...needs to be in everyone's toolbox

good product

2008-09-01
Received a different item for Christmas last year and decided I wanted this product. This has 2 tools in one which i liked.

Its is okay

2008-08-08
It is ok, it works but not every time. I had removed 4 screws successfully, but had problem with one other where it didn't work that well, so I had to drill it out. Good Luck...

Item to have in your tool box

2008-08-01
Ever have a bolt break off when working on your engine? Now here is the item that you where missing. The ProGrabber bolt and screw exractor. Installing a new water pump and the bolt broke off when removing the old pump. Just grab your ProGrabber and walla the bolt comes out and you contiune on with the installation. No need to redrill the hole and install with a tap and die set or a helicoil to fix the threads. ProGrabber all in one exractor.